Blaupunkt Woodstock DAB 53 - Station Tuning and Scanning

DANSK
61
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching REG on/off
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “REG” appears in the dis-
play. “OFF” or “ON” is displayed
alongside “REG”.
➮ To switch REG on/off, press the
or button :.
➮ Press the MENU button 8 or OK
;.
Switching the RDS function on/off
➮ To use the RDS functions (AF and
REG), press the RDS•SF button
?.
The RDS functions are active when
“RDS” lights up in the display with a
symbol. When the RDS functions are
switched on, “REG ON” or “REG OFF”
appears briefly in the display.
Selecting the frequency range /
memory bank
This unit can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) rang-
es. There are four memory banks for
the FM range and one for each of the
MW and LW ranges.
Five stations can be stored in each
memory bank.
➮ Briefly press the BND•TS button
5 to switch between the memory
banks and frequency ranges.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮ Press the or button :.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
➮ Press the or button :.
Note:
● You can only tune into stations
manually if the RDS function is de-
activated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
➮ Press the or button : to
move to the next station on the
broadcasting network.
Note:
● The RDS function must be activat-
ed before you can use this feature.
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use the Scan or Travelstore function.
RADIO MODE