64
When PTY is switched on, PTY appears
in the display.
➮ Press the MENU button 8 or OK
;.
Selecting a programme type and
starting seek tuning
➮ Press the or button :.
The current programme type appears
in the display.
➮ If you want to select another pro-
gramme type, you can do so by
pressing the
or button :
whilst this display is visible.
Or
➮ Press one of the buttons 1 - 5 >
to select a programme type that is
stored on one of these buttons.
The selected programme type is dis-
played briefly.
➮ Press the or button : to start
seek tuning.
The next station corresponding to your
selected programme type will then be
tuned into.
Storing a programme type on a
station button
➮ Select a programme type using the
or button :.
➮ Press the required station button 1
- 5 > for longer than two seconds.
The programme type is now stored on
the station button 1 - 5 > that you se-
lected.
Optimising radio reception
Treble reduction feature during
interference (HICUT)
The HICUT function improves reception
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced thus reducing the
interference level.
Switching HICUT on/off
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “HICUT” appears in the
display.
➮ Press the or button : to set
the HICUT.
“HICUT 0” means no reduction will be
made, “HICUT 3” means a maximum
automatic reduction of the treble level
and interference level.
➮ Press the MENU button 8 or OK
;.
Interference-related waveband
change (SHARX)
With the SHARX function you can elim-
inate interference from neighbouring
stations almost completely (FM). Acti-
vate the SHARX function in an area of
high transmitter density.
Switching SHARX on/off
➮ Press the MENU button 8.
➮ Press the button : repeatedly
until “SHARX” appears on the dis-
play.
RADIO MODE
To Next Page
Loading...
