DANSK
85
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Loudness
If loudness is activated, the bass and
treble levels are aurally compensated,
i.e. they are boosted at low volume lev-
els.
The loudness boost can be set in steps
ranging from 0 to 6. If you select the 0
setting, the loudness function will be
deactivated.
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the button : repeatedly
until “LOUDNESS” appears in the
display.
➮ Press the or button : to ad-
just the boost level.
The selected boost level appears in the
display alongside “LOUD”. “LOUD 6” is
the maximum boost level; “LOUD 0”
means that loudness is deactivated.
➮ When you have finished making
your changes, press the MENU
button 8.
Equalizer
This unit is equipped with a parametric
digital equalizer. In this case, paramet-
ric means that one frequency can be
increased or decreased (GAIN +8 to -
8) individually for each of the five filters.
The following filters are available:
● SUB LOW EQ 32 - 50 Hz
● LOW EQ 63 - 250 Hz
● MID EQ 315 - 1,250 Hz
● MID HIGH EQ 1,600 - 6,300 Hz
● HIGH EQ 8,000 - 12,500 Hz
These filters can be set without the need
for measuring equipment. They will al-
low you to significantly influence the
sound characteristics in your vehicle.
Notes on adjusting the settings
We recommend you use a CD that you
are familiar with for making changes to
the settings.
Before adjusting the equalizer, set the
sound and volume distribution settings
to zero and deactivate loudness. For
further details, refer to the chapter enti-
tled “Sound and volume distribution set-
tings”.
➮ Listen to the CD.
➮ What impression does the sound
give you?
➮ Now read the “Sound impression”
column in the table entitled “Help
adjusting the equalizer”.
➮ Set the equalizer values as de-
scribed in the “Measures” column.
EQUALIZERLOUDNESS
To Next Page
Loading...
