88
External audio sources
In addition to the CD changer, you can
also connect another external audio
source equipped with a line output.
The audio source can, for example, be
a portable CD player, MiniDisc player
or MP3 player.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from
your Blaupunkt dealer.
Switching the AUX input on/off
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “AUX_IN_OFF” or
“AUX_IN_ON” appears in the dis-
play.
➮ Press the or button : to
switch AUX ON or OFF.
➮ When you have finished making
your changes, press the MENU
button 8 or OK ;.
Note:
If the AUX input is switched on, you can
select it by pressing the SRC button @.
SPECIFICATIONS
EXTERNAL AUDIO SOURCES
Specifications
Amplifier
Output power: 4 x 25 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 45 watts max.
power
Tuner
Frequency ranges:
FM : 87.5 - 108 MHz
MW : 531 - 1,602 kHz
LW : 153 - 279 kHz
FM frequency response:
35 - 16,000 Hz
DAB
BAND III (Europe): 174.928 MHz -
239.200 MHz (Channel 5A - Channel
13F)
L-BAND (Europe): 1.452961 GHz -
1.490625 GHz (Channel LA - Channel
LW)
L-BAND (Canada): 1.452816 GHz -
1.491184 GHz (Channel 1 - Channel
23)
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out
4 channels: 3 V
Input sensitivity
AUX input : 2 V / 6 kΩ
Tel./Navi input : 10 V / 1 kΩ
Subject to changes!
To Next Page
Loading...
