74
Briefly displaying the time
You can briefly display the time for 2
seconds in the display.
➮ Briefly press the / DIS button 7.
Programming your favourite
tracks for an MP3-CD
Using the TPM function (Track Program
Memory), you can program and play
your favourite tracks for a particular CD.
You can carry out the programming in
any order you like, however, the tracks
will always be played in ascending or-
der. If you have set the device to play
your favourite tracks, only the previously
programmed tracks on the current MP3-
CD will be played. The list of favourite
tracks will be deleted when you remove
the CD.
Programming favourite tracks
To program your favourite tracks for a
CD, proceed as follows:
➮ Select your first favourite track.
➮ Press button 1 > for longer than
two seconds.
“STORED” appears in the display. The
track has now been added to the list of
favourite tracks for this CD.
➮ Continue in the same way for your
remaining favourite tracks on the
CD.
Switching TPM on/off
To switch the TPM function on/off,
➮ press button 1 > repeatedly until
“TPM ON” or “TPM OFF” appears
in the display.
If no tracks are programmed, an appro-
priate notice will be displayed.
Deleting individual tracks from a list
You can delete individual tracks from a
list of favourite tracks.
➮ Listen to the track that you want to
delete from the list.
➮ Press the or button :.
➮ Press and hold down button 2 >
for longer than four and less than
eight seconds until you hear a con-
firmation beep.
Deleting all the lists for all CDs
You can delete all stored tracks for all
the CDs.
➮ Press and hold down button 2 >
for longer than eight seconds until
you have heard all three confirma-
tion beeps.
MP3 MODE
To Next Page
Loading...
