68
Selecting tracks
➮ Press one of the arrow buttons :
to select the next or previous track.
If you press the
or button : once,
the current track will be played again
from the beginning.
Fast track selection
To quickly select tracks backwards or
forwards,
➮ keep one of the / buttons :
pressed until fast-reverse / fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
➮ keep one of the buttons :
pressed until fast searching back-
wards / forwards begins.
Random track play (MIX)
➮ Press button 5 MIX >.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Cancelling MIX
➮ Press button 5 MIX > again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can briefly play all the tracks on the
CD.
➮ Press the OK button ; for longer
than two seconds. The next track
will then be played briefly.
Note:
● You can set the scanning time
(scantime). For further details,
please read the section entitled
“Setting the scantime” in the “Radio
mode” chapter.
Stopping SCAN and continuing
playback
➮ To stop scanning, press the OK
button ;.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
➮ If you want to repeat a track, press
button 4 RPT >.
“REPEAT TRCK” appears briefly in the
display and the RPT symbol lights up.
The track is repeated until you deacti-
vate RPT.
Deactivating REPEAT
➮ If you want to stop the repeat func-
tion, press button 4 RPT > again.
“REPEAT OFF” appears briefly in the
display and the RPT symbol disappears.
Normal playback is then resumed.
Pausing playback (PAUSE)
➮ Press button 3 >.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 > while in
pause mode.
Playback is resumed.
CD MODE
To Next Page
Loading...
