To Next Page
C
cynthiamartinAug 1, 2025
What to do if my Blizzard Lighting LB HEX DJ Equipment has no power?
- AAmanda SummersAug 1, 2025
If your Blizzard Lighting DJ equipment has no power, check the fuse, AC cord, and circuit for any malfunctions.
What to do if my Blizzard Lighting LB HEX DJ Equipment has no power?
If your Blizzard Lighting DJ equipment has no power, check the fuse, AC cord, and circuit for any malfunctions.
What to do if my Blizzard Lighting DJ Equipment has no light output?
If there is no light output from your Blizzard Lighting DJ equipment, check to ensure the fixture is operating under the correct mode, such as sound active, auto, DMX, etc., if applicable.
Why is my Blizzard Lighting LB HEX not responding to audio?
If your Blizzard Lighting DJ equipment isn't responding to audio, verify that the fixture is in 'Sound Active' mode.
Why does my Blizzard Lighting LB HEX automatically shut off?
If your Blizzard Lighting DJ equipment is automatically shutting off, check the fan in the fixture. If the fan has stopped or is moving slower than normal, the unit may have shut itself off due to high heat to protect itself from overheating.
How to fix a dim beam on Blizzard Lighting DJ Equipment?
If the beam from your Blizzard Lighting DJ equipment is dim, check the optical system and clean any excess dust or grime.
Why is the movement slow on my Blizzard Lighting DJ Equipment?
If your Blizzard Lighting DJ equipment has slow movement, verify that the 220V/110V switch is in the correct position, if applicable. Also, check that the speed channels are set appropriately.
Important guidelines for safe installation, usage, and maintenance of the lighting fixture.
Overview of DMX channel assignments and their functions for 11-channel mode.
Overview of DMX channel assignments and their functions for 6-channel mode.
Step-by-step guide for connecting fixtures in a DMX chain.
Safety and practical advice for mounting and rigging the lighting fixtures.
Guide on integrating the LB Hex fixture with the wiCICLE® wireless DMX system.
Detailed map of the fixture's control panel menu options and their functions.
How to set the fixture to operate in DMX mode and configure DMX address.
Detailed breakdown of DMX channel values and their corresponding functions in 6-channel mode.
Detailed breakdown of DMX channel values and their corresponding functions in 11-channel mode.
Detailed specifications including dimensions, power, light source, optical, and thermal data.
A guide to diagnosing and solving common problems encountered with the fixture.
General| Input | 3-pin XLR |
|---|---|
| Output | 3-pin XLR |
| Control | DMX, Sound Active |
| Operating Modes | DMX, Sound Active |
| Voltage | 100-240VAC, 50-60 Hz |
| Beam Angle | 25 degrees |
