Blodgett MT1828E - Oven Assembly; Oven Stand with Casters

Installation
6
Oven Assembly
OVEN STAND WITH CASTERS
NOTE: Install the locking casters on the front of
the stand.
1. Attach each leg w ith casters to the stand
frame w ith a lock washer and nut. DO NOT
tighten completely.
2. Position the shelf between the legs w ith the
smooth surface facing the top of the stand.
Aligntheshelfwiththeholesineachleg.At-
tach the shelf to each leg with a nut and bolt.
3. Tighten the bolts installed in step 1.
4. Rest the oven on its back. Install the oven
alignment pins (4) into the four holes provided
on the bottom of the oven.
5. Place the oven onto the stand. Locate align-
ment pins with holes in frame of oven stand.
Top of
Stand
Leg
Stand
Frame
Shelf
Alignment
Pin
Figure 3