Blomberg BGRP34520CSS - Appliance Handling and Dimensions; How to Move the Appliance Safely; Required Clearances and Dimensions

••mNOTICE: Material damage!
•• I Do not place other items on the top of the
•• appliance. The appliance must be transported
upright. The door and/or handle must not be
used for lifting or moving the appliance. Take
care not to touch ihe oven heating element
also iocated at ihe top of the oven cavity, just
behind the ridged area. It is recommended to
wear gloves and long sleeves to protect hands
and forearms from abrasion and potentia•
scratches durinfJ the HtinfJ process. It is also
recommended to take oft watches and jewelry
and to wear work shoes during instanaton for
foot protection.Remove the oven door for
easier handBng and installation.
• The appliance must be placed directly on
the floor. It must not be placed onto a base
or a pedestal.
How to move the appliance
Movement of your appliance is most easily
achieved by lifting the front as indicated in the
drawing. Open the oven door sufficiently to allow
a comfortable and safe grip on the underside of
the oven roof avoid causing any damage to the
grill element or any internal parts of the oven. Do
not move by pulling on the door handle or knobs.
Move the appliance a bit at a time until placed in
the
16/EN
Clearances & Dimensions
Dimensions that are shown in figure must be
used. Given dimensions provide minimum clear-
ance. There needs to be a 30-inch minimum
clearance between the top of the cooking surface
and the bottom of unprotected wood or metal