To Next PageTo Next PageWhat to do if my Blue Clean BC390HSS Pressure Washer unit will not turn on?
First, ensure your Blue Clean Pressure Washer is in the “OFF” position. Then, plug the electrical cord into a grounded 120-volt outlet, avoiding any extension cords. If the cord doesn't fit, the outlet may not be properly grounded; use a different outlet. If it still doesn't work, try another outlet. If the issue persists, contact Customer Service at 1-866-235-5112.
Why is water leaking from where the high pressure hose connects to the spray gun on my Blue Clean BC390HSS?
If water is leaking where the high-pressure hose connects to the spray gun of your Blue Clean Pressure Washer, check for an o-ring at the end of the high-pressure hose's metal tip. If the o-ring is missing, this will cause a leak. An O-Ring Replacement Kit (L) is included with your purchase. Additional kits are available online at www.arblueclean.com or by calling Customer Service at 1-866-235-5112 to place an order.
Why is my Blue Clean BC390HSS Pressure Washer turning on for 2 seconds then shutting off?
Your Blue Clean Pressure Washer is likely working as intended. When properly connected to a water source and assembled, it may briefly turn on to prime the pump and then automatically shut off, awaiting the spray gun trigger to be pressed. When the trigger is activated, water flow is sensed, and the power washer turns on. You can also try turning the power switch off, holding the trigger on the spray gun to ensure a steady water stream, and then simultaneously turning the power switch back on.
What to do if my Blue Clean Pressure Washer is running but there is no water flow?
If your Blue Clean Pressure Washer is running but no water is flowing, ensure the power is off until water flows through the spray gun to prevent motor damage. Check the water source, and inspect the Garden Hose Adapter for loose connections and filter for debris. Eject the nozzle from the lance to see if the clog comes from the nozzle. If so, follow the nozzle cleaning instructions. Remove the lance and spray directly from the spray gun to identify if the lance is the problem.
General| Weight | 64 lbs |
|---|---|
| Hose Length | 25 ft |
| Maximum Pressure | 3900 PSI |
| Nozzle Types | 0°, 25°, 40°, Soap |
| Nozzles Included | 0°, 25°, 40°, Soap |
Essential warnings and basic safety rules for operating the pressure washer.
Servicing requirements for double-insulated appliances and GFCI protection.
Instructions for cleaning the screen inside the garden hose adapter.
How to clean clogged or partially clogged nozzles.
Guidelines for storing the power washer to prevent damage.
How to use the pump saver product for protection and lubrication.
Explains how to make a warranty claim and the process involved.
