36
Power Rake Operation and Maintenance Manual
Maintenance
Cleaning the Attachment
AVOID SERIOUS INJURY OR DEATH
Before servicing the Power Rake:
• Lower the machine’s lift arms and place
the power rake on flat, level surface.
• Engage parking brake, stop engine,
remove the key and exit the machine.
• Disconnect attachment hydraulic hoses.
WARNING
AVOID SERIOUS INJURY OR DEATH
Securely block up the attachment before
working underneath.
WARNING
Rotor Wrapping
Debris such as rope, wire, roots, plastic etc.
may wrap around rotor. STOP IMMEDIATELY
and remove foreign material. Spinning of
rotor and throwing of material may cause
harm to operator/bystander!
IMPORTANT
Rotor wrapping may cause damage to
bearings or bearing seals by jamming/
cutting causing premature wear and
damage.
To Next Page
Loading...
