EasyManua.ls Logo

Bluebird EF500 - SIM Cards; Data Usage; More Settings

Bluebird EF500
145 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 Settings (for Android)
118
10.4 SIM Cards
Use this menu to configure the settings for the two SIM cards in your device.
On the Home screen, tap > SIM cards.
• Activate either the CARD 1 or CARD 2 to enable the usage of each SIM card.
• Tap SIM 1 or SIM 2 to set the each SIM name, carrier, etc.
• Tap Cellular data, Calls or SMS messages to specify the preferred SIM card to perform these options.
You can choose from the following options: Ask every time, CARD 1, CARD 2.
10.5 Data Usage
On the Home screen, tap > Data usage.
Turn Cellular data on to use the cellular data for mail app, GPS, etc.
• Turn Set cellular data limit on to make your device turn off cellular data once it reaches the set limit. The
orange bar appears in graphs on the screen.
• Tap > Restrict background data to restrict the use of some apps and services unless your device is
not connected to a Wi-Fi network.
• Tap > Show Wi-Fi to display the WI-FI tab in this settings menu. If you want to hide the WI-FI tab, tap
Hide Wi-Fi.
• Tap > Network restrictions to restrict the use of apps in the background when connected to a Wi-Fi
network. The app may warn you before using these networks for large downloads.
• Tap > Cellular networks to configure SUBS Settings.
10.6 More Settings
Use this menu to change more wireless and networks settings for interaction with other devices.
On the Home screen, tap > More.
• Airplane mode: Tap to start Airplane mode. All wireless and mobile services are disabled when Airplane
mode is activated.
• Default SMS app: Tap to specify a default SMS app among various SMS apps in your device.
• NFC: Tap to turn on the NFC feature to allow data exchange by bringing two devices into close proximity.
• Android Beam: Available only when the NFC feature is activated.
• Tethering & portable hotspot
– USB tethering: Use USB tethering to share the data connection with a computer via USB.
– Portable Wi-Fi hotspot: Use the portable Wi-Fi hotspot to share the data connection through the Wi-Fi
network.
The Portable Wi-Fi hotspot feature requires more battery power and increases your data usage. It
may incur extra charges depending on your data plan.

Table of Contents