Bluebird RT080 - Finding and Calling Contacts; Messaging Contacts; Using the Gmail Application

6 Applications
35
Speed dial settings
• Voicemail: Tap to set up your voicemail.
– Service: Tap to set the provider of the voicemail service.
– Setup: Tap to set the voicemail number.
– Sound: Tap to select the ringtone to alert you of a new voicemail message.
– Vibrate: Tap and select the checkbox to set your device to vibrate for a new voicemail message.
• No.2 to 9: Tap to add speed dials.
Calls
• Calling accounts
– SIP accounts: Tap to choose to receive Internet calls for an account added to the device, to view or
change SIP accounts, or to add accounts.
– Use SIP calling: Tap to select the situations when you will use SIP calling.
– Receive incoming calls: Tap and select the checkbox to receive incoming SIP calls. If you enable this
option, the device will consume more power.
• Voicemail: Refer to Speed dial settings on page 35.
• Fixed Dialing Numbers: Use a Fixed Dialing Number (FDN) to limit your phone to dial only the phone
numbers or area codes saved in the FDN list.
– Enable FDN: Tap to enable FDN by entering the PIN.
– Change PIN2: Tap to change the PIN for FDN access.
– FDN list: Tap to manage the FDN list.
• Wi-Fi calling: Tap to switch Wi-Fi mode on. You can select a preferred Wi-Fi calling mode.
• Turn on video calling: Tap to turn on video calling.
• GSM call settings: Tap to set the additional Global System for Mobile communications (GSM) only call
settings.
– Call forwarding: Tap and set to forward incoming calls to a different phone number.
– Additional settings: Tap to select to activate the caller ID and call waiting feature.
– Call barring: Tap to set outgoing and incoming call barring settings.
• CDMA call settings: Tap to set the additional Code Division Multiple Access for mobile communication.
– Call forwarding: Tap and set to forward incoming calls to a different phone number.
– Call waiting: Tap to activate the call waiting feature.
– Voice privacy: Tap and select the checkbox to enable enhanced privacy mode.
• IMS Settings: Tap to set the IP Multimedia Subsystem for mobile communication.
– VT Call Quality: Tap to set the VT call quality between Low and High.
Call blocking
Tap to add a number you want to block.