BLUM PRO-CENTER - 2 Setting up PRO-CENTER; Unpacking and Assembly

9 BA-077/1EN M6X.20XX
2 - Setting up PRO-CENTER
2.1 - Unpacking and assembly
2.1.1) PRO-CENTER space requirement
• PRO-CENTER without horizontal drilling unit
Height H = 890 mm
B = 1000 mm
D = 700 mm
• PRO-CENTER with horizontal drilling unit
Height H = 890 mm
B = 1000 mm
D = 1100 mm
2.1.2) Space requirement of drilling head and ruler storage rack
H1 = 613 mm
H2 = 600 mm
B = 1282 mm
D = 350 mm
2.1.3) Unpacking PRO-CENTER
• Remove box
• Loosen fixing screws (D)
2.1.4) Setting up and securing machine to a suitable table
ATTENTION
A machine with a horizontal gearbox weighs approx. 95 kg.
A machine without a horizontal gearbox weighs approx. 75 kg.
The table should have the proper dimensions
a) Two people should use the handles (D2) on the machine
to lift it to the work top.
130$&/
5
&
3



130$&/5&3

%
%