19
Auto Generator Start (AGS)
Figure 16: Click on the Auto Generator (AGS) icon, then follow the prompts to enable AGS.
To use AGS from your RVMasterController, you may need to update the RVMaster
App on the RVMasterController.
When enabled (Figure 16), Auto Generator Start (AGS) will monitor battery and/
or climate levels and automatically turn the generator on and off to support these
functions.
If AGS is enabled and conditions determine that the generator should start to support
battery and climate functions, the RVMasterNode will automatically attempt to start
the generator a total of four times. After four failed starts, the RVMasterNode will no
longer attempt to start the generator.
Please consult your generator’s owner’s manual if AGS fails because the generator
could not be started.
To Next Page
Loading...
