▷ When the driver is wearing infrared imperme‐
able sunglasses.
Depending on the
equipment version:
Automatic Lane Change
Assistant
Concept
The system additionally supports the driver when
changing lanes on multilane roads.
General information
The system uses the sensors of the steering and
lane control assistant.
Safety information
Warning
The system cannot serve as a substitute for the
driver’s personal judgment in assessing the
traffic situation. Based on the limits of the sys‐
tem, it cannot independently react to all traffic
situations. There is a risk of accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where appropri‐
ate.
Additionally, the notices for the Steering and
Lane Control Assistant apply.
Additional information:
Steering and Lane Control Assistant, refer to
page 230.
Functional requirements
▷ The functional requirements of the steering
and traffic jam assistant are fulfilled.
Functional requirements, refer to page 230.
▷ Driving on a road without pedestrians or cy‐
clists and with physical barriers to oncoming
traffic, such as crash barriers.
▷ Lane markings have been detected.
▷ Maximum speed approx. 110 mph, 180 km/h.
▷ The minimum speed is country-specific.
Switch lane change assist on/off
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. If necessary, "Driving"
5. "Steering Assistance"
6. "Automatic Lane Change"
Changing lanes
1.
Ensure that the traffic situation permits
changing lanes.
2. Press the turn indicator lever in the required
direction to the pressure point for signaling
briefly.
Steering support in the required direction can
be detected a short time later.
After the lane change, the system helps keep the
vehicle in the new lane.
Canceling a lane change
The lane change can be canceled by steering
movement into the opposite direction.
Seite 236
CONTROLS
Driver assistance systems
236
Online Edition for Part no. 01405A2C7F8 - II/21
To Next Page