OverviewControlsDriving hintsCommunication NavigationEntertainmentMobilityReference
75
Cruise Control. The system will only inter-
vene by applying the brakes.
In such situations, the system can also be
interrupted by pressing the accelerator.
You can resume use of the system as
desired, as soon as the road conditions and
the traffic situation permit.
The driver retains control
The driver's actions always take prece-
dence. If the driver operates the acceler-
ator while Active Cruise Control is in use,
the automatic braking function is tempo-
rarily interrupted. When the accelerator is
released, the desired speed is re-estab-
lished or the selected distance from the
vehicle in front maintained.
Do not leave your foot on the acceler-
ator pedal, otherwise the system will
be overridden when it needs to reduce the
car's speed, and it will not be possible for
the system to apply the brakes.
Make sure that the accelerator pedal is not
being pressed permanently by floor mats or
other objects.
<
Malfunctions
If a malfunction occurs, a message appears
in the Check Control. Also observe the
supplementary information provided in the
control centre.
Heavy rain, dirt, snow and ice may impair
the system's ability to detect preceding
vehicles.
If necessary, clean the radar sensor at the
front of the car, beneath the bumper. Take
particular care when removing snow and
ice.
ba.book Page 75 Thursday, December 19, 2002 8:13 PM
To Next Page
Loading...
