EasyManua.ls Logo

BMW AG/ICOM - Safety Instructions; UL Standard Compliance

BMW AG/ICOM
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vehicle Interface of Integrated Communication Optical Module (ICOM)
Page 5
User Guide
of 29
Copyright © BMW AG / ICOM User Guide
Version 1.0/ Februar 08
3.
Safety Instructions
3.1
Instructions in accordance with certification complying with UL standard
1. Read all instructions.
2. Do not operate equipment with a damaged cable or if the equipment has been damaged -
until it has been examined by a qualified serviceman.
3. To protect against risk of fire, do not operate equipment in the vicinity of open containers of
fuel (gasoline).
4. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
5. Adequate ventilation should be provided when working on operating combustion engines.
6. Use only as described in this manual. Use only manufacturer’s recommended attachments.
7. “WARNING” and the following or the equivalent: “Risk Of Explosion” This Equipment Has
Internal Arcing Or Sparking Parts Which Should Not Be Exposed To Flammable Vapor. This
Equipment Should Be Located At Least 460 mm (18 Inches) Above The Floor.”
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
www.bmwicom.net