BMW G30 2018 - Test Functions

Displays�and�Controls�2018
4.�Display�Elements
31
4.1.8.�Test�functions
Using�the�test�functions�values�can�be�read�out�or�checks�on�the�instrument�cluster�can�be�performed.
The�test�functions�are�activated�via�the�steering�column�switch.�The�test�functions�are�activated�as
follows:
• Activate�PAD�mode
• Hold�down�on-board�computer�button�on�the�steering�column�switch�for�10�s.
The�following�test�functions�are�possible:
Test�function Description
01 Identification
02 System�test
03 Rolling�mode
04 Initialization�of�on-board�computer,�range
05 End�of�test
06 Unlocking
Go�to�other�menus�under�"Unlocking".�The�function�is�unlocked�by�inputting�the�checksum�of�the�last
7�digits�of�the�vehicle�identification�number.
Unlocking�test�function Description
01 Tank
02 Temperature
03 On-board�computer�average
04 Correction�factor