BNF Blade 500 3D User Manual

RTF
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni
500 3D

BNF Blade 500 3D Specifications

General

Brand	BNF
Model	Blade 500 3D
Category	Toy
Language	English

Summary

General Safety Precautions and Warnings

Critical Helicopter Operation Warnings

Warnings regarding large model operation and safe operating distance.

Charging the Flight Battery

Battery Charging Procedure and Codes

Step-by-step process for charging and status code explanations.

Charging Warnings

Throttle Hold Operation

Throttle Hold Safety Caution

Important safety reminder to engage throttle hold before flying.

Spektrum DX6i Transmitter Setup

Spektrum DX7/DX7se Transmitter Setup

Spektrum DX7s Transmitter Setup

Spektrum DX8 Transmitter Setup

Transmitter and Receiver Binding

Binding Procedure Steps

Step-by-step guide for binding the transmitter and receiver.

Installing the Flight Battery

Control System Tests

Rudder Control Test

Procedure to test the rudder control functionality.

Cyclic Control Test

Procedure to test elevator, aileron, and collective pitch controls.

Blade Tracking Procedure

Safe Distance for Tracking

Motor Control Test Procedure

Motor Test Safety Precautions

Pre-Flight Checks and Flying Guidelines

Pre-Flight Checklist

List of checks to perform before each flight.

Flight Adjustments and Settings

Belt Tension Adjustment and Maintenance

Maintenance Schedule and Inspections

Post-Crash Procedures and Warranty Information

Post-Crash Check List