BobsCNC QUANTUM MINI User Manual

114
Step 9 Wire Management.
WARNING In order to reduce electrical noise
which can interfere with the proper operation of the
Stepper Motors and Controller it is required that all the
wiring and securing of loose wires be performed as
illustrated in the manual. Failure to do so may result in
poor machine performance.
Step 9a Make a loop of cord approximately six
inches long from the Router to the
midpoint of the loop. This allows the
router to move up and down the Z Axis
without stress to the cord.

BobsCNC QUANTUM MINI Specifications

General

Brand	BobsCNC
Model	QUANTUM MINI
Category	Industrial Equipment
Language	English