Need help?Do you have a question about the BobsCNC QUANTUM MAX and is the answer not in the manual?
General| Brand | BobsCNC |
|---|---|
| Model | QUANTUM MAX |
| Category | Control Systems |
| Language | English |
Machine dimensions and weight specifications.
Dimensions of the machine's working area (X, Y, Z).
Explains CAUTION, WARNING, DANGER, and TIPs symbols.
Essential safety rules for operating the router.
Lists tools needed and recommendations for electronic setup.
Tips and best practices for a successful assembly.
Lists required wood and hardware for the belt drive.
Detailed steps for mounting stepper motors.
Lists all wood parts for the rear X-frame assembly.
Hardware and step-by-step instructions for rear X-frame assembly.
Lists wood and hardware for the front X-frame assembly.
Detailed steps for assembling the front X-frame.
Lists wood and hardware for the Z-spindle mount.
Detailed steps for assembling the router mount.
Lists wood and hardware for Y/Z carriage.
Step-by-step instructions for assembling the Y carriage.
Instructions for installing the Acme screw for Z-axis.
Lists all wood and hardware for the gantry assembly.
Step-by-step instructions for gantry side assemblies.
How to attach and connect the home switches.
Instructions for final assembly stages.
Instructions for connecting stepper motors to the controller.
How to manage and connect wires for the machine.
Lists parts for the spoilboard and hardware.
Step-by-step guide to install the spoilboard.
Images of the fully assembled CNC router.
Process for adjusting the spindle perpendicularity.
How to use the clamping system to secure workpieces.
Table of firmware settings and their descriptions.
Chart detailing washer dimensions.
To Next Page