BobsCNC QUANTUM MINI - User Manual

Assembly Manual
Rev 1.0
MINI

Summary

Getting Started and Component Overviews

Tools and Operation Requirements

Lists assembly tools, operation software, and bits required for the CNC.

Core Assembly Components Overview

Details wood and hardware components for Belt Drive and X Frame assemblies.

Major Assembly Procedures

Z Spindle Mount Assembly Guide

Details the process and lists components for the Z spindle mount assembly.

Y Carriage and Z Axis Assembly

Guides the assembly of the Y carriage and Z axis components.

Gantry Assembly Instructions

Step-by-step instructions for building the main gantry structure.

Final Assembly and System Integration

Final Assembly and Drive Belts

Connects the Y carriage, installs drive belts, and finalizes the machine frame.

Wiring and Electronic Setup

Instructions for connecting home switches and stepper motors to the controller.

Workbench, Calibration, and Operation

T-Slot Spoilboard Installation

Instructions for attaching the spoilboard sections and aluminum T-slots.

CNC Spindle Tramming

Process for adjusting the spindle to be perpendicular to the spoilboard.

Clamping System Setup

Explains the assembly and use of the wooden work holding clamps.

Appendix and Reference

Firmware Configuration Values

Lists key-value pairs for configuring the machine's firmware.

Washer Size Reference Table

A table for washer part numbers, IDs, ODs, and thicknesses.

BobsCNC QUANTUM MINI Specifications