6
Safety Precautions and Warnings
BobsCNC Routers have a 110 v. Power Supply and use bits that spin at 30,000
rpm with cutting edges that are sharp and hazardous. The operator must
understand the potential hazards and is responsible to take appropriate
safety precautions before operating the Router.
• Only use extension cords rated for 20 amps plugged into a dedicated
outlet.
• Inspect the machine before every use for maintenance issues: loose
fasteners, belts, etc.
• Do not operate the machine with dull or damaged router bits.
• Always unplug machine after each use and when cleaning the router or
changing router bits.
• Remove rings, bracelets, watches, necklaces before using the machine.
• Wear snug fitting clothing and/or roll up long sleeves to prevent snagging.
• Use appropriate personal protective equipment (PPE) when operating
machine including safety glasses and hearing protection.
• Keep hands, hair and clothing away from the moving parts of the machine.
• Do not operate the machine when under the influence of alcohol or
prescription medications.
• Make certain the workpiece is clamped securely in place before starting
the machine.
• Never leave the machine running unattended.
• Children must be supervised by adults when operating the machine.
• Do not operate the machine in the presence of flammable materials.
• Keep floors clean, dry, and free of debris to eliminate slip and/or trip
hazards.
• Have a suitably rated fire extinguisher on hand when the machine is in
operation.
To Next Page
Loading...
Need help?
General
