7
Getting Started
Required Tools to Assemble the Quantum CNC Kit:
Metric Socket Set
#1, #2 and #3 Phillips Screw Drivers
Needle Nose Pliers
Set of Metric Allen Wrenches
Pliers
Utility Knife
Clear Nail Polish or Blue LOCTITE
Scissors
Blue Painter’s Tape
To Operate the BobsCNC Quantum CNC Router, you need will need:
Computer with control software for GRBL.
Materials for Projects.
1/4 inch Shaft Router bits. A 1/8 inch Collet must be purchased to
use 1/8 inch Shaft Router bits.
Recommended for the electronic setup include:
Multimeter to correctly connect the Power Supply and to set the
current for the Stepper Motors (a great tool for general electronic
trouble shooting).
To Next Page
Loading...
Need help?
General
