Bodet SIGMA H User Manual

5.4 Adding DHF receivers
To put the SIGMA in “DHF initialisation” mode and enable synchronisation
of a new clock, validate the initialisation mode with the key,
The following screen is displayed :
Select “ACTIVE” mode using the and
keys and validate with the key.
The “init” display mode will appear
alternately with the normal display during
this period (4 hours).
It is possible, once the receivers DHF initialized, to stop this mode in this menu.
5.5 Access code
To enter or remove the SIGMA access code, validate the option with the
key,
The following screen is displayed :
Choose the option you require and
validate it with the key.
The access code is fixed, , ,
, .
If there are 3 attempts with the wrong access code, an alarm message
appears. The keyboard is locked for 10 minutes. It is possible to unlock it
from the technician menu.
11
Add DHF re ceiv ers ok
Ac cess code õ
Init mode:AC TIVE ú
Add re ceiv ers ok
Access code ok
Time and date õ
Access code Yes ú
ok

Bodet SIGMA H Specifications

General

Brand	Bodet
Model	SIGMA H
Category	Clock
Language	English