15
Single Camera: tracker must working in FMS very well
Sending command 000000PHO to tracker to take one picture, the picture will be transferred to FMS
and display in real-time and photo report page.
Sending command 000000PTI300 to tracker for setting tracker automatically take picture each 300
seconds, the picture will be transferred to FMS and display in real-time and photo report page.
Click ―take photo‖ button in real-time page in FMS to take one picture, you will see it in real-time and
photo report page.
Multiple Cameras: each camera with one ID, they will work in sequence, each camera takes 2
minutes to take photo and transfer it to FMS.
Sending command 000000PHO1 to tracker to take one picture by No.1 camera, the picture will be
transferred to FMS and display in real-time and photo report page.
Sending command 000000PHO to tracker to take one picture by each camera, the picture will be
transferred to FMS and display in real-time and photo report page.
Sending command 000000PTI720 to tracker for setting tracker automatically take picture by each
camera each 12 minutes, the picture will be transferred to FMS and display in real-time and photo
report page. More cameras you connected, more minutes request in this command.
Click ―take photo‖ button in real-time page in FMS to take one picture by each camera, you will see it
in real-time and photo report page.
Relay: stop vehicle remotely
Sending SMS command 000000OPC1,1 to tracker, vehicle will be stopped immediately.
Sending SMS command 000000OPC1,1,1 to tracker, vehicle only be stopped after its speed lower
than 20km/h.
Sending SMS command 000000OPC1,0 to tracker to restore the vehicle before you driving it.
Click ―Stop Engine‖ button in real-time in FMS, select tracker, select output1, choose ―Yes‖ after
―Safe Mode‖, select ―Stop Engine‖ after ―Action, finally click ―Submit to tracker‖, when you want to
restore it, just select ―Restore Engine‖ after ―Action‖, safe mode can be ignored when restore
engine.
Please don’t use this feature while car/vehicle with high-speed driving, and we suggest connect relay with
fuel control line in your car, Bofan is not liable for any traffic accidents.
Buzzer:
Sending SMS command 000000OPC2,1 to tracker to trigger buzzer for one time
It also can be set to automatically triggered by other alarms
For example, Speed Alarm Buzzer keep working for 10 seconds,
To Next Page
Loading...