Bomag BPH 80/65 - Page 23

Operation
BOMAG 23 BPH 80/65
Fig. 14
l Adjust the steering rod to the required height
using the height adjustment (Fig. 14) .
Fig. 15
l Set the throttle lever (Fig. 15) to position
"MAX.".
!
Caution
Operate the vibratory plate only with full en-
gine speed.
i
Note
For short breaks always return the throttle lever to
idle speed position.
Switching the vibration on
Fig. 16
!
Danger
Danger of accident!
The vibratory plate will immediately vibrate for-
ward or reverse at a speed that corresponds
with the travel lever position (toggle switch).
l Turn the vibration push button (Fig. 16) clock-
wise and unlock it.
Vibrationisswitchedon.
l Adjust the desired travel direction forward or
reverse with the travel lever (toggle switch).
Driving forward
i
Note
Vibration must be switched on.