Bomag BPH 80/65 - Page 24

Operation
BOMAG 24 BPH 80/65
Fig. 17
l Keep the top part of the travel lever (toggle
switch) pressed (Fig. 17) , until the vibratory
plate has reached the desired forward speed.
i
Note
The travel lever (toggle switch) returns to middle
position. The chosen forward speed remains un-
changed.
Drivinginreverse
Fig. 18
!
Danger
Danger of accident!
As a measure to avoid injuries when driving re-
verse the vibratory plate should only be guided
by the hand from the side.
i
Note
Vibration must be switched on.
l Press the bottom part of the travel lever (tog-
gle switch) (Fig. 18) , until the vibratory plate
has reached the desired reverse speed.
i
Note
The travel lever (toggle switch) returns to middle
position. The chosen reverse travel speed re-
mains unchanged.
If the vibratory plate gets stuck
Fig. 19
l Set the throttle lever (Fig. 19) to position "Min".
l Guide the vibratory plate by the steering rod in
compliance with the travel lever position, until
it comes free.