BT50/BT60/BT65BOMAG4
Technical modifications reserved
The following noise and vibration values according to the EEC machine regulation (edition
93/68/EEC) have been measured under typical operating conditions for this machine over a
predetermined travel distance.
During operation these values may vary because of the existing operating conditions.
Noise values
The sound level according to enclosure 1, paragraph 1.7.4.f of the EEC-machine regulation is
Sound pressure level at the operator’s stand
BT50/BT60
L
pA
= 97 dB(A)
Sound capacity level:
L
WA
= 108 dB(A)
BT 65
L
pA
= 97 db(A)
Sound capacity level:
L
WA
= 107 db(A)
These sound values where determined according to ISO 6081 for the sound pressure level (L
pA
) and ISO
3744, DIN 45635 for the sound capacity level (L
WA
).
Vibration value
The vibration values according to enclosure 1, paragraph 2.2 or 3.6.3 a of the EEC machine regulation are:
Hand-arm-vibration values
The weighted effective acceleration value determined according to ISO 8662 part 1, DIN 45675, part 9 is
4,6 m/sec
2
for BT 50/BT 60. ON 4,2 m/sec
2
for BT 65.
Technical Data
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
