BT50/BT60/BT65 BOMAG 17
Fig. 3
•
Turn the fuel shut-off valve (Fig. 3) to position
STOP (closed).
Fig. 4
•
Pull the rope with the starter handle (Fig. 4)
until a resistance can be felt.
•
Now let the starter handle return to initial posi-
tion.
This measure avoids moisture deposits in the
engine.
3.8 Transport and loading
Danger of accident!
Make sure that no persons are endangered by
the machine tipping over or slipping off.
Lash the machine down so that it is properly
secured against slipping and turning over.
When lifting the machine attach the lifting
gear only to the transverse bar on the guide
bow.
The machine should not swing about when
being lifted.
Do not step or stand under loads being lifted.
Use only secure lifting gear of sufficient lifting
capacity.
Fig. 1
•
To load the tamper attach the lifting gear to the
transverse bar on the guide bow (Fig. 1).
Weights see technical data
Operation
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
