BT50/BT60/BT65BOMAG30
5.1 General notes
Please observe strictly the safety regulations in
section 2 of these operating and maintenance
instructions.
Faults occur frequently because the machine has
not been properly operated or serviced. You should
therefore always read these instructions on proper
operation and maintenance whenever a fault oc-
curs. If you cannot identify the reason for a fault or
cannot eliminate it yourself by following the trouble
shooting table, consult one of our service stations
at our branch offices and dealers.
On the following pages you find a selection of fault
remedies. It goes without saying, that we are not
able to list all possible faults.
Trouble Shooting
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
