BT50/BT60/BT65BOMAG16
Fig. 5
•
During short breaks you should always set the
throttle lever to "MIN"-position (Fig. 5).
This avoids premature wear of the centrifugal
clutch and reduces the fuel consumption
3.7 Shutting the engine down
Do not shut the engine down suddenly from
full speed, but let it idle for a while for tem-
perature equalization.
Fig. 1
•
Set the throttle lever (Fig. 1) to "MIN"-position.
•
Let the engine run at idling speed for a short
while.
Fig. 2
•
Press the stop switch (push button) (Fig. 2).
Danger of burning!
Immediately after shutting the engine down
the engine is still hot, do not touch the ex-
haust.
Stand the machine so that it cannot fall over.
Operation
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
