BT50/BT60/BT65 BOMAG 15
3.6 Work/operation
Danger of accident!
Guide the machine only with the handle.
Do not let the machine run unattended.
Use your personal noise protection means
(ear defenders).
Fig. 1
•
Set the throttle lever (Fig. 1) to "MAX"-position.
•
The machine works at max. frequency.
Fig. 2
•
In order to achieve a smooth running of the
machine adjust the throttle lever in the range I
(Fig. 2), depending on the condition and the
density of the soil.
Fig. 3
•
The travel speed can be influenced by altering
the load on the steering handle (Fig. 3).
No
load = slowly forward
Fig. 4
•
The travel speed can also be influenced by
varying the pressing force on the steering bow
(Fig. 4).
Strong
force = fast forward
The lift height of the material to be compacted
should not be higher, than the tamper can man-
age.
If the tamper should get out of rhythm on highly
compacted ground, smooth running can be
achieved by slightly changing the engine speed
and/or the inclination of the tamper.
Operation
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
