BT50/BT60/BT65BOMAG32
Faults Possible cause Remedy
Engine does
not run at full
speed
Throttle cable defective Change the throttle cable
Throttle cable incorrectly adjusted Adjust the throttle cable
Air filter blocked Clean or change the filter cartridge
Engine defective Change the engine/have the fault
corrected
Carburettor defective Change the carburettor
Exhaust blocked Clean the exhaust
Engine runs at
high speed, but
no vibration
Centrifugal clutch defective Change the centrifugal clutch
Conrod broken Call the BOMAG service to change the
conrod.
Trouble Shooting
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
