EasyManuals Logo

Boneco H680 User Manual

Boneco H680
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
en
AIR QUALITY INDICATOR
After being switched on, the BONECO H680 carries out
an initial air measurement and the
symbol flashes.
After measuring the air, the display shows the current air
quality (see figure below).
The cleaner the air is, the more segments are shown in
white.
OPERATING MODE AT INITIAL START-UP
The BONECO H680 uses the “Hybrid” operating mode
when being switched on for the first time: This operating
mode cleans the air while humidifying it at the same time.
The humidity can be regulated at will (see page 20).
Air purification works automatically and without user
interaction.
The fan level is controlled by the electronics and adapts
to the environment to ensure the most efficient cleaning
and/or humidification possible.
Fan noise may be clearly audible at first; it will decrease
after a few minutes, however, once the humidity gets
closer to the desired value.
USING THE “HYBRID” OPERATING MODE
1. Switch the appliance on by tapping the
button once.
The particle sensor automatically begins measuring the
amount of dirt in the air. The appliance starts the hu-
midifying process automatically if humidity is below 50%.
BASIC SETTINGS
The BONECO H680 saves all of the settings if you switch
off the appliance using the
button.
The basic settings described here (“Hybrid” operating
mode, “AUTO” comfort mode, etc.) can be restored at
any time. Disconnect the appliance from the power outlet
for about 10 seconds by unplugging the power cord from
the power outlet.
THE “HYBRID” OPERATING MODE (AIR HUMIDIFICATION AND AIR PURIFICATION)

Table of Contents

Other manuals for Boneco H680

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Boneco H680 and is the answer not in the manual?

Boneco H680 Specifications

General IconGeneral
Noise level51 dB
Air purify rate205 m³/h
Number of speeds-
Humidifier functionYes
Water tank capacity10 L
Humidification capacity1000 ml/h
Suitable for room area up to150 m²
Suitable for room volume up to375 m³
Filtering capabilityFine dust, Pollen, Viruses
Product colorBlack, White
AC input voltage100 - 240 V
AC input frequency50-60 Hz
Power consumption (max)30 W
Weight and Dimensions IconWeight and Dimensions
Depth347 mm
Width435 mm
Height490 mm
Weight10400 g

Related product manuals