Boneco H680 User Manual

27
en
WATER TANK
1. Fill the water tank halfway with hot water and add a
small amount of dishwashing detergent.
2. Thoroughly clean the inside of the water tank by hand
or with a suitable cleaning brush.
3. Also clean the cover.
WATER BASE
1. Pull the water base out of the BONECO H680.
2. Remove the drum with the evaporator mat.
3. Take the Ionic Silver Stick
®
out of the water base.
4. Clean the water base and all of the parts inside. These
can be removed for cleaning.
CLEANING THE INTERIOR PARTS
IMPORTANT NOTES
Use a cleaning brush and a damp cloth for cleaning. Al-
ways add a small amount of dishwashing detergent to
the hot water.
Always unplug the BONECO H680 from the power
outlet before you start cleaning or doing mainte-
nance! Failure to do so can result in electric shock
and fatal injury!
Mold inside your BONECO H680 can add impurities
to the air and may adversely affect your health. Be
sure to remove any you find for this reason.
Do not use alcohol or corrosive cleaning agents for
cleaning.
Do not clean the BONECO H680 in a dishwasher.
High temperatures can deform the parts and make
them unusable. This damage is not covered by the
warranty.

Boneco H680 Specifications

General

Noise level	51 dB
Air purify rate	205 m³/h
Number of speeds	-
Humidifier function	Yes
Water tank capacity	10 L
Humidification capacity	1000 ml/h
Suitable for room area up to	150 m²
Suitable for room volume up to	375 m³
Filtering capability	Fine dust, Pollen, Viruses
Product color	Black, White
AC input voltage	100 - 240 V
AC input frequency	50-60 Hz
Power consumption (max)	30 W

Weight and Dimensions

Depth	347 mm
Width	435 mm
Height	490 mm
Weight	10400 g