Boneco H680 User Manual

19
en
COMFORT MODES
There are three different comfort modes available in each
of the three “Hybrid”, “Air purification” and “Air humidifi-
cation” operating modes:
, and .
SWITCHING THE COMFORT MODE
1. Switch between the , and comfort
modes by either:
• Pressing the button on the remote control repeat-
edly
• Pressing the button on the keypad on the appliance
repeatedly
“AUTO” COMFORT MODE
In
comfort mode, the BONECO H680 uses all of the
fan levels between 1 and 6. The preset humidity is 50%.
“SLEEP” COMFORT MODE
In
comfort mode, the BONECO H680 can even be
used in a bedroom at night. The appliance automatically
operates at the lowest fan level of 1 to keep operating
noise level to a minimum. The preset humidity is 45%.
“BABY” COMFORT MODE
The comfort mode uses fan level 1 through 4 and
increases the humidity to 60 %. This value is ideal for
use in a nursery or baby's room since higher humidity
is recommended for babies and small children. The fan
also operates quietly enough that it will not trigger a baby
monitor.
SELECTING THE VARIOUS COMFORT MODES

Boneco H680 Specifications

General

Noise level	51 dB
Air purify rate	205 m³/h
Number of speeds	-
Humidifier function	Yes
Water tank capacity	10 L
Humidification capacity	1000 ml/h
Suitable for room area up to	150 m²
Suitable for room volume up to	375 m³
Filtering capability	Fine dust, Pollen, Viruses
Product color	Black, White
AC input voltage	100 - 240 V
AC input frequency	50-60 Hz
Power consumption (max)	30 W

Weight and Dimensions

Depth	347 mm
Width	435 mm
Height	490 mm
Weight	10400 g