Boneco H680 User Manual

33
en
The HYBRID filter has to be changed after about one year
to ensure that dirt and pollen continue to be filtered from
the air.
The display indicates an upcoming need to replace the
HYBRID filter with the following symbol:
The HYBRID filter is replaced according to Figures 2 to 7
on pages 11 and 12.
REPLACING THE HYBRID FILTER
1. Remove the front cover of the BONECO H680.
2. Take off the pre-filter.
3. Remove the used HYBRID filter and dispose of it with
your regular household waste.
4. Remove the protective foil from the new HYBRID filter.
5. Insert the HYBRID filter into the holder as shown on the
label.
6. Reinsert the pre-filter and the front cover.
7. Simultaneously press the and buttons on the ap-
pliance for 5 seconds to hide the filter change symbol.
REPLACING THE HYBRID FILTER

Boneco H680 Specifications

General

Noise level	51 dB
Air purify rate	205 m³/h
Number of speeds	-
Humidifier function	Yes
Water tank capacity	10 L
Humidification capacity	1000 ml/h
Suitable for room area up to	150 m²
Suitable for room volume up to	375 m³
Filtering capability	Fine dust, Pollen, Viruses
Product color	Black, White
AC input voltage	100 - 240 V
AC input frequency	50-60 Hz
Power consumption (max)	30 W

Weight and Dimensions

Depth	347 mm
Width	435 mm
Height	490 mm
Weight	10400 g