Boneco H680 User Manual

18
en
“AIR HUMIDIFICATION” OPERATING MODE
Use of the HYBRID filter is optional in the “Air humidifica-
tion” operating mode.
1. Press the
button until just the indicator for humidity
and the fan level are shown.
2. To switch back to the “Hybrid” operating mode, press
the button until the air purifier and humidifier are
both shown as active at the same time.
The BONECO H680 can also be used without a HYBRID
filter in the “Air humidification” operating mode. When
switching to the “Hybrid” or “Air purification” operating
mode, the following symbol flashes on the display if a
HYBRID filter is not inserted:
“AIR PURIFICATION” OPERATING MODE
The air is not humidified in the “Air purification” operat-
ing mode.
1. Press the
button until just the indicator for air qual-
ity and the fan level are shown.
2. To switch back to the “Hybrid” operating mode, press
the button until the air purifier and humidifier are
both shown as active at the same time.
The BONECO H680 can also be used without water in
the “Air purification” operating mode. When switching to
the “Hybrid” or “Air humidification” operating mode, the
following symbol flashes on the display if the water tank
is empty:
ONLY AIR HUMIDIFICATION / ONLY AIR PURIFICATION

Boneco H680 Specifications

General

Noise level	51 dB
Air purify rate	205 m³/h
Number of speeds	-
Humidifier function	Yes
Water tank capacity	10 L
Humidification capacity	1000 ml/h
Suitable for room area up to	150 m²
Suitable for room volume up to	375 m³
Filtering capability	Fine dust, Pollen, Viruses
Product color	Black, White
AC input voltage	100 - 240 V
AC input frequency	50-60 Hz
Power consumption (max)	30 W

Weight and Dimensions

Depth	347 mm
Width	435 mm
Height	490 mm
Weight	10400 g