Bonnet EQUATOR - 2.2 Visualising Oven Defects

Page 9 3BE390758NU – 12/11
BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
2.1.3 PRACTICAL USE OF THE CONTROL PANEL
Switch on the oven (switch 5).
Preheating
Select the preheating mode desired (button 1).
Choose the required temperature of the cavity (button 2) for
preheating.
Warning: As a rule, preheat to about 10° above cooking
temperature.
Select timer mode and set to 00.00 (button 4).
Cooking
Open the door, load the oven, close the door.
Select the cooking mode (button 1).
Choose the cooking temperature (button 2).
Connect a core probe, if needed.
Select timer mode with a time, time set at 00.00 or core
probe (button 4).
Display a cooking time or core temperature if needed (button
3).
End of cooking
Open the door, unload the oven, close the door.
Select the semi-automatic cleaning cycle (switch 1).
Wait for the end of the cycle.
Switch off the oven (switch 5).