Bonnet EQUATOR - Page 9

Page 8 3BE390758NU – 12/11
BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
Switch 4 : Used during cooking
Without connected core probe.
The display shows the time spent starting from the beginning of cooking if the set time is nil.
If a cooking time has been set, the display shows the time remaining before cooking is completed.
In any case, the first touch on this switch results in the display of the set value corresponding to the
position of switch 4 (cooking time, core temperature or speed).
A second touch on the switch results in the modification of this set value.
With connected core probe.
Without touching this switch, the display shows the core temperature read by the probe. (Example:
"SC55" in °C or "P1 30" in °F).
A first touch on this switch shows the time remaining untill cooking is completed.
A second touch on this switch displays the set value corresponding to the position of switch 4.
A final touch on the switch corrects this set value.
Switch 4: End of cooking mode
Core probe mode
position
Cooking will stop when the core temperature (adjusted with switch
3) is reached.
A buzzer indicates that cooking is completed.
Note:
The buzzer for completion of cooking sounds three times. The
display shows "End".
Timing mode position
Cooking will stop when the cooking time (set with switch 3) is over.
A buzzer indicates that cooking is completed.
Note:
The buzzer for completion of cooking sounds 3 times. The
display shows "End".
Ventilation speed mode position
Chooses between two ventilation speeds.
The reduced speed avoids the drying of products such as rice and
pasta when reheating.