bora X Pure Series User Manual

EN
46
Operation
www.bora.com
Fig. 7.4 Menu item 3: Show and reset lter status
Resetting the filter status:
 long press on the fan button .

All slider elements are once again displayed at 100%
brightness.
 Move to another menu item or close the menu.
Menu item 4:
Duration of the automatic after-run function
INFO The duration of the automatic extractor function
can be set using menu item 4.
There are three times to choose from:

20 minutes

15 minutes

10 minutes
Fig. 7.5 Menu item 4: Duration of the automatic after-run
function

The current duration is displayed for 2 seconds.
Selecting the duration of the automatic after-run function:
 Tap the corresponding slider segment .
 Move to another menu item or close the menu.
7.6.2 Menu item 2:
Childproofing feature
INFO With menu item 2 the childproofing feature can
be permanently switched on or off. This setting is
adopted for each new cooking session.
Fig. 7.3 Menu item 2: Childproong feature
Permanently activating the childproofing feature
 Tap the top slider segment

o
n
is displayed.
 Move to another menu item or close the menu.

The childproofing feature is permanently activated.
Permanently deactivating the childproofing feature
 Tap the bottom slider segment
 Move to another menu item or close the menu.

The childproofing feature is permanently deactivated.
7.6.3 Menu item 3:
Showing and resetting the filter status
(only in recirculation mode)
INFO If menu item 3 is called up, the filter status will be
automatically shown.

bora X Pure Series Specifications

General

Automatic heat up function	Yes
Childproof lock	Yes
Residual heat indicator	Yes
Automatic cut-off	Yes
Demo mode	Yes
Filter service display	Yes
Automatic extractor function	Yes
Burner Type	Induction
Power levels	9
Appliance connection	230 V
Material	Ceramic glass
Material surface	Glass ceramic