-2-
★
An appropriate safety circuit breaker device should be installed
within the building wiring installation, meeting local regulations
and standards. Please see the UPS specification in chapter 5.2.
for the correct sizing.
★
Remember the UPS can be powered by more than one source.
1.2 Operation
★
Do not disconnect the mains cable to the UPS during operation
as this would remove the earthing point of the UPS and of all
connected loads.
★
The UPS may have internal batteries, electricity maybe present
at the output terminals of the UPS even with the mains
disconnected.
★
In order to completely isolate the UPS, first press the OFF button
to turn off the UPS, then disconnect the mains lead.
★
Ensure that no liquid, excess of dust or other foreign objects can
enter the UPS.
To Next Page
Loading...
Need help?
General