Bosch 2600 Series - Page 31

LTC 2600 Series | Instruction Manual | Multiplexer Read (MR) Commands
Bosch Security Systems | July 12, 2004
EN
|
31
MR-HELP
This command displays a screen of help instructions
regarding MR command entry.
MR-KEY-LOCKOUT
This command returns the setting for the lockout flag
for the front panel and external keypad.
Parameter values are:
0 Disabled
1Enabled
MR-LANGUAGE
This command returns the language setting for the
multiplexer.
Parameter values for <language> are:
1 English
2German
3French
4 Spanish
5 Italian
6 Dutch
MR-LOG-SETUP
This command returns the settings for logging of the
following system conditions: action, alarms, videoloss,
events, and errors (respectively).
Parameter values (for each of the conditions above) are:
0 Disabled
1Enabled
MR-MODEL-NUMBER
This command returns the multiplexer model number.
Parameter values which may be returned are:
LTC2681/50 16-channel extended color simplex,
PAL
LTC 2681/60 16-channel extended color simples,
NTSC
LTC2682/50 16-channel extended color duplex,
PAL
LTC2682/60 16-channel extended color duplex,
NTSC
MR-MON-A-DISPLAY <mode>
This command returns the camera list being displayed
in the specified mode on Monitor A.
Parameter values are:
<mode> 0 Full Screen
1 Single Quad
23 x 3 Multi
34 + 3 Multi
412 + 1 Multi
54 x 4 Multi
68 + 2 Multi
<camera list> A list of camera numbers (values
(returned value) 1 to 16), up to 16 numbers (one for
every cameo in screen mode
selected). The order depends on the
screen mode selected (i.e. how
cameos are arranged in the screen).
MR-MON-BORDERS
This command returns the setting for the border
brightness for cameos shown on monitor A during
multi-screen displays.
Parameter values for <brightness> are:
0Transparent
1 Black
2-6 Grey*
7 White
*NOTE: All grey values (2-6) will be returned as 2.
MR-MON-LARGE-TEXT
MR-MON-SMALL-TEXT
These commands return the settings for text brightness
and background outline brightness.
Returned parameter values for <text-bright> and
<background-bright> are:
*NOTE: All grey values (1-7) will be returned as 1.