Establishing a Direct Connection
4 Select the Link index sheet to establish a connection between the A-Link Plus program
and the AMAX panel.
Figure 5.7: Link – Selecting Direct Connect
1. Select Direct Connect as communication model.
2. Click on the Connect button to connect to the AMAX panel.
P If the connection is successful, the status changes to Connected and the AMAX panel
type and version is displayed.
5.5.7
AMAX panel Programming and Operating the AMAX System | en 21
Bosch Sicherheitssysteme GmbH Quick Start Manual 2015.05 | 05 | F.01U.309.297
To Next Page
Loading...
