Bosch AMAX 2100 - Page 29

07-int. siren
15-all faults
20-reset
05-ext.away siren
13-tamper
06-ext.stay siren
14-ext. fault
12-battery fault
16-fire alarm
04-sys alarm all
ENTER OUTPUT No.
6 OUTPUT MANAGER
23-RF kf button 4
00-not used
17-fire reset
10-tel.line fault
08-int. sir w.tmp
29-ready to arm
36-schedule
21-follow zn even
01-syst. disarmed
28-bypassed zone
02-system armed
OUTPUT SETTINGS
19-stay armed
Certification
OUTPUT MODE
0
33-medical alarm
35-follow zone
000
OUTPUT EVENT TYPE
25-verified alarm
31-24 hour alarm
32-panic alarm
SIREN SETTINGS
OUTPUT TIME: sec
OUTPUT AREA / ZONE
SIREN TIME: min
30-walk test
2-continuous inv
0-continuous
1-pulse
34-RF power fault
Master Timer for Outputs
00
1
1
1
Master Timer for Outputs
SIREN BEEP ENABLE
SIREN OFF ANY KEY
INT SIREN INDIC ON
0-disable 1-enable
0-disable 1-enable
0-disable 1-enable
26-unverif. alarm
27-technic. alarm
24-chime indic.
00 = all/any Area/s 01–16 Area 1-16
18-away armed
Parameters / Description
22-RF kf button 3
11-mains fault
03-sys al audible
09-entry/exit del
Menu Items
Default
Figure 5.15: Output Manager
AMAX panel
Programming and Operating the AMAX System | en 29
Bosch Sicherheitssysteme GmbH Quick Start Manual 2015.05 | 05 | F.01U.309.297