28 en | Installing
AMC2 Modular
Controller
2018-09 | AMC2-4W_UL | Bosch Access Systems GmbH
External power supplies used must be UL certified and must be
located in the same room as the connected AMC2 device.
Recommended maximum distance between power supply unit
and AMC2 is 3 m (9.84 ft).
Notice!
These specifications apply to power supply, readers, relay
outputs, and extension interface.
Regarding inputs, specific voltage-drop values need to be taken
into account. Refer to Connecting Analog Input Devices, page
41.
To Next Page
Loading...
