Bosch B426 - Exiting the Web-Based Configuration

28 en | Configuration Conettix Ethernet Communication Module
2016.08 | 08 | F.01U.266.226 Installation and Operation Guide Bosch Security Systems, Inc.
Figure5.10: Firmware upgrade specify upgrade file
Notice!
Upgrading the firmware in the module causes the module to terminate the current web
browsing session.
5.3.11 Exiting the web-based configuration pages
When you are finished configuring the module, select the Save and Execute option. The Save
and Execute web page opens.
To save the configuration changes that you made, click OK. A confirmation message appears.