24.5 Bypass menu
Use the Bypass menu to temporarily take points out of the
security system, and enter them back into the system. Bypassed
points do not create alarm or trouble events, do not detect
intruders, and cannot send any reports. For example, to leave a
window open and turn the system on, you bypass the window
point and then turn the system on.
24.5.1 Bypass
You can bypass points when an area is turned off (disarmed).
Points remain bypassed until you unbypass them or some points
return when the area is turned off (disarmed). Use point
bypassing with discretion: bypassing a point reduces the level of
security.
Bypassing a point:
1. Open the Main menu.
2. Press [1] or [ENTER] to open the On/Off menu.
3. Use [NEXT] to go to the Bypass menu, and press [ENTER], or
simply press [5].
4. Press [1] or [ENTER] to open the Bypass Points menu.
5. Select a point to bypass.
6. Press [ESC] to exit the menu.
Control Panels B92x/B91x On/Off menu | en 147
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
